MFL Journal Papers

J. Kang, D. S. Wilkinson, M. Jain, J. D. Embury, A. J. Beaudoin, S. Kim, R. Mishra , and A. K. Sachdev "On the Sequence of Inhomogeneous Deformation Processes Occurring During Tensile Deformation of Strip Cast AA5754 " Acta Materialia, 54 , 209-218 2006
Q. Situ, M. Jain and M. Bruhis "A Suitable Criterion for Precise Determination of Incipient Necking in Sheet Materials" Materials Science Forum, Vol2 519-521, pp. 111-116 2006
D. R. Metzger, X. Duan, M. Jain, D. S. Wilkinson, R. Mishra, S. Kim and A. K. Sachdev "The Influence of Particle Distribution and Volume Fraction on the Post-Necking Behaviour of Aluminium Alloys" Mechanics of Materials, Vol. 38 , 1026-1038 2006
X. Duan, M. Jain and D. S. Wilkinson "Development of a heterogeneous microstructurally based finite element model for the prediction of forming limit diagram of sheet metal" Metallurgical and Materials Transactions A, Vol. 37A 2006
E. Azhikannickal, M. Jain and M. Bruhis "Test methods for the determination of the stress-strain behaviour of oriented polypropylene (OPP) tubes in uniaxial compression" Polymer Testing (in press) 2006
D. S. Wilkinson, X. Duan, J. Kang, M. Jain and J. D. Embury "Modeling the Role of Microstructure on Shear Instability With Reference to the Formability of Aluminum Alloys" Materials Science Forum, Vol2 519-521, pp. 183-190 2006
J. Kang, D.S. Wilkinson, D. V. Malakov, H. Halim, M. Jain, J. D. Embury, R.K. Mishra "Effect of Processing Route on the Spatial Distributions of Constituent Particles and Their Role in the Fracture Process in AA5754 Alloy Sheet Materia Submitted to Materials Science and Engineering A (submitted) 2006
X. Duan, M. Jain, D. R. Metzger, D. S. Wilkinson "A Unified Finite Element Approach for the Study of Post-Yielding Deformation Behavior of Formable Sheet Materials" Journal of Pressure Vessel Technology (in press) 2006
P. D. Wu, A. Graf, S. R. MacEwen, D. J. Lloyd, M. Jain and K. W. Neale "On Forming Limit Stress Diagram Analysis" Inter. J. of Solids and Structures, Vol. 42, pp. 2225-2241 2005
J. Kang, M. Jain, D. S. Wilkinson and J. D. Embury "Microscopic Strain Imaging Using Scanning Electron Microscopy Topography Image Correlation at Large Strain" J. Strain Analysis, Vol. 40, No. 8 2005
X. Duan, M. Jain, D. Metzger, J. Kang, D. S. Wilkinson and J. D. Embury "Prediction of Shear Localization during Large Deformation of a Continuous Cast Al-Mg Sheet" Materials Science and Engineering, A394, pp. 192-203 2005
X. Duan, M. Jain, M. Bruhis and D. S. Wilkinson "Experimental and Numerical Study of Intense Shear Banding for Al-Alloy under Uniaxial Tension" Advanced Materials Research, Vols. 6-8 , pp. 737-744 2005
Q. Situ, M. Bruhis, M. Jain "Trimming of AA6111-T4 and AA5754-O Automotive Aluminum Sheet Materials" International Journal of Forming Processes (IJFP), Vol.8, No.4 2005
J. Kang, D. S. Wilkinson, J. D. Embury, M. Jain and Armand J. Beaudoin "Effect of Type-B Portevin-Le Chatelier Bands on the Onset of Necking in Uniaxial Tension of Strip Cast AA5754 Sheets" Scripta Materialia, 53, 499-503 2005
J. Kang, D. S. Wilkinson, J. D. Embury and M. Jain "Local Strain Measurement in a Strip Cast Automotive Aluminum Alloy Sheet" SAE Transactions: Journal of Materials and Manufacturing, 114 , 156-165 2005
M. Jain, J. Allin, X. Duan and D. J. Lloyd "Effect of Reverse Dome Stretching on Dome Height and Forming Limits of Sheet Materials" Materials Science and Engineering, A390 (1-2), pp. 210-216 2005
P.D.Wu, S.R.MacEwen, D.J.Lloyd, M.Jain, P.Tugcu, K.W.Neale "On Pre-straining and the Evolution of Material Anisotropy in Sheet Metals" Plasticity 2004
PD.Wu, M.Jain, J.Savoie, S.R.MacEwen, P.Tugcu, K.W.Neale "Evaluation of Anisotropic Yield Functions for Aluminum Sheets" Plasticity 2003
D.J. Lloyd, D. Evans, C. Pelow, P. Nolan and M. Jain "Bending in Aluminum Alloys AA6111 and AA5754 Using the Cantilever Bend Test" Materials Science and Technology, Vol. 18, pp. 621-628 2002
H.R. Shakeri, A. Buste, M.J. Worswick, J.A. Clarke, F. Feng, M. Jain and M. Finn "Study of Damage Initiation and Fracture in Aluminum Tailor Welded Blanks Made Via Different Welding Techniques" Journal of Light Metals, Vol. 2, pp. 95-110 2002
H.R.Shakeri, A.Buste, M.J.Worswick, J.A.Clarke, F.Feng,M.Jain, and M.Finn "Microstructural Study of Damage Initation and Fracture in Aluminium Tailor Welded Blanks Made Via Different Welding Techniques" Metallurgical and Materials Transactions 2001
P.D.Wu, K.Inal, K.W.Neale, L.D.Kenny, M.Jain and S.R.MacEwen "Large Strain Behaviour of Very Thin Aluminium Sheets Under Planar Simple Shear" J.Phys.IV France 11 2001
M.Jain "A Simple Test to Assess the Formability of Tailor-Welded Blanks" Inter.J.of Forming Processes, Vol.3, No.3-4, pp.185-212 2000
E.T.Harpell, M.J.Worswick, M.Finn, M.Jain, and P.Martin "Limiting Draw Ratios of AA57554-0 Aluminium Alloy Sheet:Numerical Prediction and Validation" J.Mater.Processing Tech., Vol.100, pp.131-141 2000
A.Buste, X.Lalbin, M.J.Worswick, J.A.Clarke, M.Finn, B.Altshuller and M.Jain "Prediction of Strain Distribution in Aluminium Tailor Welded Blanks for Different Welding Techniques" Canadian Metall. Quaterly (Netherlands), Vol.39, no.4, pp.493-501 2000
P.D.Wu, A.Graf, M.Jain and S.R.MacEwen "On Alternate Representation of Forming Limits" Key Engineering Materials, Vols.177-180, pp.517-522 2000
F.Liu, and R.Sowerby "Detrmination of Optimum Shaped Blanks when Deep Drawing Prismatic Cups" J.Mats.Shaping Technology, Vol.9, pp.153-159 1999
M.Jain, J.Allin and D.J.Lloyd "Fracture Limit Prediction Using Ductile Fracture Criteria for Forming of an Automotive Aluminium Sheet" Inter.J.Mech.Sciences, Vol.41, pp.1273-1288 1999
M.Jain, J.Allin and M.J.Bull "Deep Drawing Characteristics of Automotive Aluminium Alloys" Mater.Sc.Eng., A256, pp.69-82 1998
P.D.Wu, K.W.Neale, E.van der Giessen, M.Jain, A.Makinde, and S.MacEwen "Crystal Plasticity FLD Analysis of Rolled Aluminium Sheets" Metallurgical and Materials Transactions A, Volume 29A, pp.527-535 1998
J.Savoie, M.Jain, A.R.Carr, P.D.Wu, K.W.Neale, Y.Zhou, J.J.Jonas "Predictions of Forming Limit Diagrams Crystal Plasticity Models" Mater.Sc.Eng., A257, pp.128-133 1998
Y.Zhou, J.J.Jonas, L.Szabo, A.Makinde, M.Jain, and S.R.MacEwen "Incorporation of an Anisotropic Strain-Rate Potential into Three Dimensional Finite Element Simulations" International Journal of Plasticity, Vol.13, No.1/2, pp.165-181 1997
M.Jain, D.J.Lloyd, and S.R.MacEwen "Hardening Laws, Surface Roughness, and Biaxial Limit Strains of Sheet Aluminium Alloys" Int.J.Mech.Sci., Vol.38, No.2, pp.219-232 1996
H.Iseki and R.Sowerby "Determination of the Optimum Blank Shape when Deep Drawing Nonaxisymmetric Cups, Using a Finite-Element Method" JSME International Journal, Series A, Vol. 38, No.4, pp. 473-479 1995
M.Jain, S.R.MacEwen and L.Wu "Finite Element Modelling of Residual Stresses and Strength-Differential Effect in Discontinuously Reinforced Metal Matrix Composites" Material Science and Engineering A183, pp.111-120 1994
D.Lentz and R.Sowerby "A Methodology for Hole Extraction in Sheet Metal Parts" J.of Computer Aided Design, Vol. 26, pp. 771-783 1994
H.Iseki and R.Sowerby "A Method for Evaluating Limiting Drawing Ratio" J.of Materials Engineering and Performance, Vol. 2, pp. 107-112 1993
D.Lentz and R.Sowerby "Feature Extraction of Punched Regions" J.of Computer Aided Design, Vol. 25, pp. 421-437 1993
S.Nagaki, M.Goya, and R.Sowerby "The Influence of Void Distribution on the Yielding of an Elastic-Plastic Porous Solid" Int.J.Plasticity, Vol. 9, pp. 199-211 1993
M.Jain "A TEM Study of Microstructure Development during Low Cycle Fatigue of Overaged Al-Mg-Si Alloy" Journal of Materials Science, 27, pp.399-407 1992
X.Chen, and R.Sowerby "The Development of Ideal Blank Shapes by the Method of Plane Stress Characteristics" Int.J.Mech.Sci., Vol.34, pp.159-166 1992
M.Jain "Micromechanical Stresses during Low Cycle Fatigue of Overaged Al-Mg-Si Alloy" Fatigue and Fracture of Engineering Materials and Structures, Vol.15, No.1, pp.33-42 1992
F.Liu and R.Sowerby "The Determination of Optimum Shaped Blanks When Deep Drawing Prismatic Cups" J.Mats.Shaping Technology 1992
S.Nagaki, R.Sowerby, and M.Goya "An Anisotropic Yield Function for Porous Metals" Mater.Sc.Eng., Vol.A142, pp.163-168 1991
H.Iseki, and R.Sowerby "The Determination of Maximum Draw Depth during Deep Drawing" AMADA Technical Journal, Vol.24, pp.1-8 1991
M.Jain, M.C.Chaturivedi, N.L.Richards, and N.C.Goel "Strain Rate Sensitivity Effects with Forming Characteristics of Superplastic Ti-6Al-4V" Materials Science and Engineering, A13, pp.205-211 1991
M.Jain, N.L.Richards, N.C.Goel, and M.C.Chaturivedi "Microstructural Characteristics in Alpha Phase of Superplastically Deformed Ti-6Al-4V" Materials Science and Engineering, A145, pp.205-214 1991
H.Iseki, and R.Sowerby "On the Numerical Simulation of the Redrawing Ratios during the Multi-Stage Forming of Cylindrical Shells" Int.Journal of the JSME, Vol.33, pp.202-208 1990
M.Jain "Time and Space Dependent Development of Dislocation Densities during Unaxial Deformation" Archives of Mechanics, Vol.2, pp.223-232 1990
M.Jain "A Dislocation Based Analysis of Continuum Mechanical and Microscopic Local Stresses during Cyclic Deformation of Copper" Journal of Materials Research, Vol.5, No.10, pp.2079-2093 1990
M.Jain "A Theoretical Consideration of Dislocation Dynamics in Cell Forming FCC Metals" Physica Status Solidi(A), 119, K107 1990
M.Jain "Evolution of Internal Stress Variables during Cyclic Deformation of Copper" Materials Science and Engineering, Vol.A128, pp.183-193 1990
H.Iseki, R.Sowerby, D.Bhattacharyya, and P.Gatt "A Theoretical and Experimental Study of a Curved Strip Compressed by a Flat Plate" Trans ASME J.Appl.Mech., Vol.56, pp.96-104 1989
R.Sowerby "A Search for a Short Term Test to Assess the Machinability of Stinless Steels" J.Materials Shaping Technology, Vol.7, pp.161-167 1989
H.Iseki, R.Sowerby, N.Chandrasekaran, and P.Gatt "The Elastic-plastic Snap through of a Curved Metal Strip Compressed by a Flat Rigid Plate: The Influence of the End Support Conditions" Int.Journal of the JSME, Vol.32, pp.101-106 1989
R.Sowerby, and N.Chandrasekaran "A Proposal for the Onset of Chip Segmentation in Machining" Materials Science and Engineering, Vol.A119, pp.219-229 1989
R.Sowerby and M.Karima "A APC Based Computer Aided Analysis System for the Cup Drawing Process" J.Mater.Shaping Technology, Vol.32, pp.113-124 1988
E.Nakamachi, and R.Sowerby "Finite Element Modelling of Punch Stretching of Square Plates" Trans.ASME, J.Appl.Mechs, Vol.55, pp.667-671 1988
R.Sowerby, and N.Chandrasekaran "Application of McClintock's Ductile Fracture Model to Study the Tensile Straining of Some Sheroidized Steels under Superimposed Hydrostatic Pressure" Mater.Sc.Eng., Vol.79, pp.15-26 1986
R.Sowerby, and N.Chandrasekaran "The Prediction of Damage Rate in Upsetting Tests Using McClintock's Model" Mater.Sc.Eng., Vol.79, pp.27-36 1986
R.Sowerby, J.L.Duncan, and E.Chu "The Modelling of Sheet Metal Stampings" Inter.J.Mech.Sci.,Vol.28, pp.415-430 1986
D.F.Watt, and M.Jain "Effect of Martensite Morphology on the Strength Differential Effect in Dual Phase Steels" Scripta Metallurgica, Vol.8, pp.1379 1984
R.Sowerby, I.O'Reilly, N.Chandrasekaran, and N.L.Dung "Materials Testing for Cold Forging" J.Engineering Materials and Technology, Vol. 106, pp. 101-106 1984
R.Sowerby and E.Chu "Rotations, Stress Rates and Strain Measures in Homogeneous Deformation Processes" Int.J.Solids Structures, Vol. 20, No. 11/12, pp. 1037-1048 1984
M.Hirao, J.Tlusty, R.Sowerby, and G.Chandra "Chip Formation with Chamfered Tools" J.Eng. Industry, Vol. 104, pp. 339-342 1982
J.L.Duncan and R.Sowerby "Computer Aids in Sheet Metal Engineering" Annals of the CIRP, Vol. 30/2, pp. 541-546 1981
J.D.Embury and J.L.Duncan "Formability Maps" Ann. Rev. Mater. Sci., pp. 505-521 1981
D.Uko, R.Sowerby, and J.D.Embury "Bauschinger Effect in Structural Steels and Role in Fabrication of Line pipe: Part 1 Analysis of Bauschinger in Structural Steels" Metals Technology, pp. 359-368 1980
Y.Tomita and R.Sowerby "An Approximate Analysis for Studying the Plane Strain Deformation of Strain Rate Sensitive Materials" Int.J.Mech.Sci., Vol. 21, pp. 505-516 1979
R.Sowerby "New Techniques of Metal Forming" Sci.Prog.,Oxf., 64, pp.117-147 1977
R.Sowerby and W.Johnson "A Review of Texture and Anisotropy in Relation to Metal Forming" Mater.Sci.Eng., 20, pp. 101-111 1975
H.Verguts and R.Sowerby "The Pure Plastic Bending of Laminated Sheet Metals" Int.J.Mech.Sci., 17, pp. 31-51 1975
R.Sowerby and J.L.Duncan "Failure in Sheet Metal in Biaxial Tension" Int.J.Mech. Sci., Vol. 13, pp. 217-229 1971